WideLoad 690SZC - Extra Wide Composite Toe Safety Boot - Airport Friendly - 6E Fit - Stone
by
Wide Load
Suitable for
Wideload 690SZC is an extra wide safety boot in stone coloured leather, with a non-metal composite toe cap. It has an rating and is certified to EN ISO 20345:2011 S1 FO HRO SRC
The composite cap on the Wideload 690SZC is airport friendly and 10% (150 grams) lighter than its steel cap counterpart and incorporates high performance ‘nylon6’ non-metallic lace hardware. The cap provides less transmission of hot and cold while achieving “steel-like” safety for impact and compression. The cap meets all ISO 20345:2011 safety standards without compromising comfort.
Wideload offers the widest fitting safety boots in the UK. The extra wide 6E fitting is genuinely very wide, and the toe box is 8mm deeper and 15mm wider than standard safety boots. The deeper toe box will happily accommodate hammer toes, swelling and other conditions which make standard steel toe caps feel tight and uncomfortable.
This work boot has a padded tongue and heel collar, as well as soft comfort insoles and breathable lining to help keep your feet cool and cushioned while you work.
The Wideload 690SZC has two insoles to allow you to fine tune the fitting to ensure maximum comfort and to create additional depth in the boot if required.
The 690SBZ has a zip opening to make it easy to put on and take off - a nice feature if you are tired after a long day! The boot also features a lower zip guard to protect the zip from mud and dirt.
If you have been disappointed with other 'wide' work and safety boots we can guarantee that you will love this one. It is one of the few work boots to come in the extra-wide width 6E fitting.
If you have swollen feet, severe bunions, hammertoes or other serious foot problems, then we strongly recommend that you try this work boot.
They are made to an extremely high standard with all the accredited safety features you would expect of a premium safety boot.
Feature Summary:
- EN ISO 20345:2011 S1, SRC, HRO, FO
- Extra wide 6E width fitting with a 8mm deeper and 15mm wider toe cap than standard safety boots
- Non Metal Composite Safety Toe
- Airport Friendly
- 10% lighter than steel toe cap version
- Nitrile rubber outsole heat resistant to 200C
- Antistatic Sole - able to resistance to an electrical charge between 0.1 and 1000 meg
- Fuel/Oil Resistant Sole
- Resists exposure to most acids, oils, and chemicals
- Rubber outsole top rated slip resistant standard (SRC for enhanced grip)
- YKK side zipper
- 2 removable PU memory foam cushioned insoles for a customised fit.
- Padded heel collar
Suitable for
Wideload 690SZC is an extra wide safety boot in stone coloured leather, with a non-metal composite toe cap. It has an rating and is certified to EN ISO 20345:2011 S1 FO HRO SRC
The composite cap on the Wideload 690SZC is airport friendly and 10% (150 grams) lighter than its steel cap counterpart and incorporates high performance ‘nylon6’ non-metallic lace hardware. The cap provides less transmission of hot and cold while achieving “steel-like” safety for impact and compression. The cap meets all ISO 20345:2011 safety standards without compromising comfort.
Wideload offers the widest fitting safety boots in the UK. The extra wide 6E fitting is genuinely very wide, and the toe box is 8mm deeper and 15mm wider than standard safety boots. The deeper toe box will happily accommodate hammer toes, swelling and other conditions which make standard steel toe caps feel tight and uncomfortable.
This work boot has a padded tongue and heel collar, as well as soft comfort insoles and breathable lining to help keep your feet cool and cushioned while you work.
The Wideload 690SZC has two insoles to allow you to fine tune the fitting to ensure maximum comfort and to create additional depth in the boot if required.
The 690SBZ has a zip opening to make it easy to put on and take off - a nice feature if you are tired after a long day! The boot also features a lower zip guard to protect the zip from mud and dirt.
If you have been disappointed with other 'wide' work and safety boots we can guarantee that you will love this one. It is one of the few work boots to come in the extra-wide width 6E fitting.
If you have swollen feet, severe bunions, hammertoes or other serious foot problems, then we strongly recommend that you try this work boot.
They are made to an extremely high standard with all the accredited safety features you would expect of a premium safety boot.
Feature Summary:
- EN ISO 20345:2011 S1, SRC, HRO, FO
- Extra wide 6E width fitting with a 8mm deeper and 15mm wider toe cap than standard safety boots
- Non Metal Composite Safety Toe
- Airport Friendly
- 10% lighter than steel toe cap version
- Nitrile rubber outsole heat resistant to 200C
- Antistatic Sole - able to resistance to an electrical charge between 0.1 and 1000 meg
- Fuel/Oil Resistant Sole
- Resists exposure to most acids, oils, and chemicals
- Rubber outsole top rated slip resistant standard (SRC for enhanced grip)
- YKK side zipper
- 2 removable PU memory foam cushioned insoles for a customised fit.
- Padded heel collar
-
This model is a 6E width fitting.
A 6E fitting is an extra wide fitting, and one of our widest.
Not only does this fitting offer plenty of width, it also has extra depth and is recommended for those with serious foot conditions such as large bunions, gout and very swollen feet.
This width is much wider than anything you can find on the high street and is only available from specialist wide fitting shops and websites.
If you have oedema or swelling, and the conditions varies through the day, then we would try a 6V fitting instead of a 6E. A 6V fitting offers more flexibility in the fitting and can be adjusted to cope with fluctuations in your condition.
Still not sure what width fitting you need?
You can read our comprehensive guide on width fittings to learn everything you need to know about width fittings.
You can also measure your width using our simple width measurement guide.
If you would rather just talk to someone about your particular situation, call us on 0208 819 7756. We have helped thousands of customers with feet related issues get the right shoes, and we would be delighted to help you too.
This model is a 6E width fitting.
A 6E fitting is an extra wide fitting, and one of our widest.
Not only does this fitting offer plenty of width, it also has extra depth and is recommended for those with serious foot conditions such as large bunions, gout and very swollen feet.
This width is much wider than anything you can find on the high street and is only available from specialist wide fitting shops and websites.
If you have oedema or swelling, and the conditions varies through the day, then we would try a 6V fitting instead of a 6E. A 6V fitting offers more flexibility in the fitting and can be adjusted to cope with fluctuations in your condition.
Still not sure what width fitting you need?
You can read our comprehensive guide on width fittings to learn everything you need to know about width fittings.
You can also measure your width using our simple width measurement guide.
If you would rather just talk to someone about your particular situation, call us on 0208 819 7756. We have helped thousands of customers with feet related issues get the right shoes, and we would be delighted to help you too.
